How to configure SLT on SV8300/SV9300 to show CLI 1

[cnyamukondiwa]

Dear Colleagues,

May you please assist me with the configuration of CLI on Single line telephone with CLI capability.

Thanking you in Advance.
Best Regards,
Cleophas

 

[belevedere]

CMD 1000, find an available cabinet/slot/port on a LC card, assign an available extension number.
EX: LC card in cabinet 1, slot 3, port 1 using extension number 1000
1000>010301>1000>EXE

 

[cnyamukondiwa]

Dear Belevedere,
I would like to thank you for the feedback.

I had already configured the extension port and it is working.
What I want to now is that I want the extension to show calling extension numbers on the display.
The telephone set has a display and it has Calling line identity specifications.
So whats happening is that when another extension calls it, it does not display the calling extension number.

Thanking you in advance
Rgds,
Cleophas

 

[belevedere]

Is this a single line telephone with a LCD display? Or, a multiline terminal?

 

[cnyamukondiwa]

Hi Belevedere,

Yes,it is a single line telephone with LCD display.
Rgds,
Cleophas

 

[belevedere]

Is this a 8300 or 9300? There is a difference in some of the programming data.
Start with CMD 0401>02>0 for 8300, 7 for 9300 = purpose of CID sender
CMD 08>507>1 = send calling station number to the analog telephone for Caller ID-Station when an internal call is terminated.
CMD 08>603>0 = Send calling station or calling party number to the analog telephone for Caller ID-Station when an incoming call is terminated via CCIS/SIP Trunk.
CMD 08>1210>0 = Access Code to be added to the calling party number when incoming call from C.O. (This assignment is required to call back from the analog telephone for Caller ID-Station)
CMD 1220>EXT>0 = Calling party information sent to the analog telephone for Caller ID-Station, 1 = Calling Party Number and Calling Party Name.
CMD 35318>TK RT>0 = Calling Name display for Caller ID-station received on Facility in ISDN message.

 

[cnyamukondiwa]

Hi Belevedere,

The CLI is now working.
Thanks for all the continued support.
Best Rgds,

Cleophas