Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to configure PBX NuPoint with fully mexed mobiles?

Status
Not open for further replies.

ulforv

Technical User
Apr 13, 2010
77
SE
HI, system MCD 3300 with version 7
NuPoint version v16.x.x

Customer uses MDA and fully mexed
we has had the operator to remove voice mail box that comes with the cell phone and should handle everything through the PBX and NuPoint. mobile operator has given me three numbers.
Unanswered
not reachable
busy

This number, I have put up in inward dialing modification, I take away all the numbers that are included in the number the operator gave me and put in the numbers to the NuPoint system.

The problem I have is that when external parties are calling on the cell phone and you end up in NuPoint the NuPoint believe that it is the owner of the voice mailbox that performs the call and gets the menu to listen to their own voice mailbox.

I use the trunk Call recognitions Service set to trusted, I can do something here, change this to FOPBX?

Anyone that has a good tip on how I set this up?

Regards UO
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top