How to configure Network Time Sync configuration in S8300 1

[surferdude949]

Im not finding where I can configure the "Network Time Sync"
in the web interface.

I'm looking for a server set up link but it's nowhere to be found, thanks.

 

[AvayaTier3]

Diagnostics
-> Network Time Sync


Configure Server
-> Configure Time Server

A great teacher, does not provide answers, but methods to teach others "How and where to find the answers"

bsh

36 years Bell, AT&T, Lucent, Avaya
Tier 3 for 26 years and counting

http://bshtele.com

 

[surferdude949]

Under server configuration the only option are these,

Display Configuration
Restore Defaults
Eject CD/DVD





I'm running the following below.
Product: AVAYA, S8300c
CM Release String: S8300-015-02.0.947.3

 

[billybobdan]

You need a login with higher access level

 

[EROded]

Go to the installation drop down tab at the top.
Click on configure server.
Configure individual services.
Network time server.

 

[surferdude949]

I clicked on Configure server and it's taking me through a server configuration process.

Steps
Review Notices
Backup Data
Wizard Usage
Server Role
Set Identities
Configure Interfaces
Configure LSP
Configure UPS
Set DNS
Set Static Routes
Configure Time Server
Set Modem Interface
Update System

 

[Mitch672]

Yes, before you get to that point, click on "configure an individual service", then click on the "Configure Tiem Server" in the left hand pane, a good server to use if your S8300 has access to the internet is 192.43.244.18 (time.nist.gov)



Mitch

AVAYA Certified Expert

 

[demanding]

Has anyone had trouble with the time staying current? We have issues with some locations not holding - one is drifting about 3-4 minutes within a day or two and it stays there. Both servers are configured to look at our NTP address (like other switches that work ok). This particular location is CM3.1.5.