Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to configure NEC SV8100 multi-trunk access code?
- Thread starter sebu1217
- Start date
belevedere
Instructor
If you do not want to set up LCR, then you can define another access code to dial out of another trunk group. See the memory blocks listed below. Some may not be necessary.
MB 11-09-02 2nd Trunk Route Access Code
Define additional trunk access codes. When a user dials the Alternate Trunk Route Access Code, the system routes their call to the Alternate Trunk Route.
11-01 : System Numbering
14-01 : Basic Trunk Data Setup
14-05 : Trunk Group
14-06 : Trunk Group routing
21-02 : Trunk Group routing for Extensions
21-15 : Individual Trunk Group Routing for Extensions
MB 11-09-02 2nd Trunk Route Access Code
Define additional trunk access codes. When a user dials the Alternate Trunk Route Access Code, the system routes their call to the Alternate Trunk Route.
11-01 : System Numbering
14-01 : Basic Trunk Data Setup
14-05 : Trunk Group
14-06 : Trunk Group routing
21-02 : Trunk Group routing for Extensions
21-15 : Individual Trunk Group Routing for Extensions
- Status
Similar threads