How to configure ISDN Dialup BRI and PRI both in Avaya IPoffice

[skjaiswal]

How to configure ISDN Dialup BRI and PRI both in Avaya IPoffice V2 can any help me regarding same


Thanks
Suresh Jaiswal

 

[derfloh]

Use „DialIn“ as the destination for an incoming call route with type data. Additionally set one interface DHCP type to DialIn.

Written out of my memories so maybe the names could be a little different.

 

[budbyrd]

You also need a user extension with a password. There is a tab in the user for turning on the Dial in option.

 

[IamaSherpa]

DHCP type to Dial In is not mandatory if to get access you set up on your PC the RAS ip address at 192.168.99.0

 

[derfloh]

No extension needed. You can use the „RemoteManager“ user for this.

 

[skjaiswal]

Hi Thanks for reply
I m new baby in for IP Office V2 version and need to configure ISDN Dial-up BRI and PRI both i went through "Administering Avaya IP Office using Manager"
What type hardware like ISDN modem ISDN lease line require how i will configure BRI PRI in IP office manager and how i will test this scenario
can u please guide me or provide steps or URL or forum where these detail steps mention .

Thanks
Suresh