Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to Configure H.323 IP trunk between Avaya S8700/G600 and Asterisk Server,

Status
Not open for further replies.

avaya033

Technical User
Jan 6, 2011
46
PR
I have a customer that recently acquire or took over a New Company and this one has and Asterisk PBX Server. They have a VPN connection between two sites, In Main Site one(1) they have and Avaya S8700 5.2 and Site Two (2) they have the Asterisk PBX Server. I need to configure and H323 IP trunk between the 2 (PBX) Sites, I do not have a SES Server. Can this be done !!!. I just started the configuration on the Avaya PBX, create Sig-Grp 6, Add IP Aserisk to Node-Name, Created Trk-Grp 6, have Route-Pattern 6, have UDP Dialing 71xx to reach Extensions on Asterisk PBX. Need help
 

Try this for your Asterisk trunk.

Has been a while since I set this up.

[Avaya]
type=friend
host=CLAN IP address that you have used to configure your signaling link
port=1720
disallow=all
allow=ulaw
canreinvite=no
dtmfcodec=0
dtmfmode=inband
context=from-avaya
gatekeeper = DISABLE

Clowns to the left of me, jokers to the right, here I am, stuck in the middle with you.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top