I have both CCM 4.0.1 and 4.1.2. How do I configure both servers to send SNMP traps to my SNMP manager? I followed Cisco's config document which basically told me to configure the Windows 2000 SNMP Service to send traps to the IP address of my SNMP manager and also define Read-Write community, which I did...but all I get in my SNMP manager are link up and cold start traps from both CCM servers when I reboot them...no SNMP traps are coming at all from the CCM itself.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to configure CCM to send SNMP traps?
- Thread starter AlpineMan
- Start date
Similar threads
- Locked
- Question