Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How to configure bridge appearance to an outside commercial line to receive calls?

Status
Not open for further replies.

avi777

Technical User
Jul 22, 2014
29
US
I know I can program a autodial to an external commercial number, but is there anyway to have commercial numbers
show as bridge appearance for incoming calls? I am trying to work something out for our Fire Department where their dispatch
can receive incoming calls on a commercial number they have. Thank you.
 
If it's a trunk, you can try changing the inc-call-handling-trmp trunk-group (the trunk group #). Intercept the last 4 digits and input the bridged number you created for the sets. So, for example, create extension 1111, assign that extension to sets as a bridged extension. Change the inc-call-handling, intercept the last 4 digits and manipulate them to 1111.
 
Is this number an analog POTS line? Look at using Personal CO line. You'll of course, if you don't already have one, need a CO trunk board (several iterations depending on your hardware).
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top