How to configure Auxilary port

[Wavesg]

I need to know how to configure my Auxilary port in a 2500 cisco router. I want to be able to dial in from a remote area through an analog phone line. Can anyone help me out. Thanks

 

[RouterGod]

It's a detailed process, too long to spell out here. So check out this public Cisco link:

http://www.cisco.com/warp/public/471/mod-aux-exec.html

Regards,

Don

 

[wybnormal]

Try this...


interface Async65
ip unnumbered loopback0
encapsulation ppp
dialer in-band
dialer string xxx-xxxx
dialer-group 1
async default routing
async mode dedicated
ppp authentication chap
!
dialer-list 1 protocol ip permit "Diplomacy; the art of saying 'nice doggie' till you can find a rock" Wynn Catlin

 

[wybnormal]

Try this...


interface Async65
ip unnumbered loopback0
encapsulation ppp
dialer in-band
dialer string xxx-xxxx
dialer-group 1
async default routing
async mode dedicated
ppp authentication chap
!
dialer-list 1 protocol ip permit

line aux 0
script dialer usr-sportster-v42bis
modem InOut
transport input all
speed 38400
flowcontrol hardware "Diplomacy; the art of saying 'nice doggie' till you can find a rock" Wynn Catlin

 

[Wavesg]

Thanks guys.