Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to configure a Remote Switch by using SNMP
- Thread starter watchers
- Start date
bnorton916
Programmer
Sounds fishy.
Anyway, you can only configure this if there MIB object that configures what you need configured.
You will need to know what MIBs this switch supports and if any of those MIB objects are relevant.
Anyway, you can only configure this if there MIB object that configures what you need configured.
You will need to know what MIBs this switch supports and if any of those MIB objects are relevant.
- Status
Similar threads
- Locked
- Question