How to config dhcp option 43 in Contivity

[Skyfall]

Our cutomer has 2 locations A & B using Contivity VPN tunnel connected. A site has BCM and WSS2360 for 2211 WLAN sets. Now B site has APs installed, base on WSS2360 configuration guide, I need config DHCP option 43 in DHCP server which is Contivity 1010 at B site for APs, so that AP can talk to WSS2360 at A site.
But I tried adding DHCP standard option 43 by using either ASCII format with "IP:192.168.x.y" or IP format with "192.168.x.y", no luck at all. WSS could not find the APs.
Any expert has the same experience before please give me some hints, it is ergent. Thanks in advance.

Life is keeping learning......

 

[Skyfall]

Problem resolved,
In firewall setup, allow all traffic through branch tunnel to branch tunnel, the option 43, type ASCII, text in: IP:x.x.x.x

That is it, works fine.



Always learn from someone, something and somewhere......
Michael C

http://www.tomkin.ca