Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to config cisco WS-C2948G swich?
- Thread starter leereg
- Start date
Hi,
The 2924G out of the box serves as a switch - pretty much, just power it up and plug your devices in and they will "work". There is a great deal of configuration that can be done with a 2924G, the config guide is found below.
Take a look on the switch to see if there is any configuration already on the switch. And following the guide above will help you explain what the configuration does.
So take a look at the guide, if you need any more help once you've got started, come straight back - there's a whole bunch of really experienced network programmers here only too willing to help.
Good luck,
Phil. If everything is coming your way then you're in the wrong lane.
The 2924G out of the box serves as a switch - pretty much, just power it up and plug your devices in and they will "work". There is a great deal of configuration that can be done with a 2924G, the config guide is found below.
Take a look on the switch to see if there is any configuration already on the switch. And following the guide above will help you explain what the configuration does.
So take a look at the guide, if you need any more help once you've got started, come straight back - there's a whole bunch of really experienced network programmers here only too willing to help.
Good luck,
Phil. If everything is coming your way then you're in the wrong lane.
- Status