How to check Dual CPU's are running

[zum]

Hi,

I'm running FreeBSD 6.2. I have 2 dual core processors and I'm not sure that both processors are running. How can you verify that both are running properly?

This is what I see when I do a "top" command.

last pid: 2150; load averages: 0.00, 0.00, 0.00 up 0+08:55:03 09:54:52
40 processes: 1 running, 38 sleeping, 1 stopped
CPU states: 0.0% user, 0.0% nice, 0.0% system, 0.0% interrupt, 100% idle
Mem: 27M Active, 202M Inact, 156M Wired, 28K Cache, 112M Buf, 2874M Free
Swap: 4096M Total, 4096M Free

PID USERNAME THR PRI NICE SIZE RES STATE TIME WCPU COMMAND
2134 sybase 1 8 0 16968K 10940K nanslp 0:01 0.00% dataserver
658 root 1 96 0 3484K 2972K select 0:00 0.00% sendmail
2103 root 1 8 0 17920K 13080K nanslp 0:00 0.00% httpd
670 root 1 8 0 1388K 1092K nanslp 0:00 0.00% cron
515 root 1 96 0 1376K 1016K select 0:00 0.00% syslogd
2075 root 1 96 0 3236K 2300K select 0:00 0.00% telnetd
2104 www 1 4 0 18208K 13444K kqread 0:00 0.00% httpd
2109 www 1 20 0 18500K 13788K lockf 0:00 0.00% httpd
2107 www 1 20 0 18512K 13808K lockf 0:00 0.00% httpd
599 root 1 96 0 1288K 800K select 0:00 0.00% usbd
2079 root 1 20 0 4796K 2876K pause 0:00 0.00% csh
2108 www 1 20 0 18484K 13780K lockf 0:00 0.00% httpd
2076 root 1 8 0 1764K 1504K wait 0:00 0.00% login
2142 root 1 8 0 1764K 1504K wait 0:00 0.00% login
2146 root 1 20 0 4668K 2928K pause 0:00 0.00% csh
2141 root 1 96 0 3236K 2348K select 0:00 0.00% telnetd
2106 www 1 20 0 18204K 13440K lockf 0:00 0.00% httpd

 

[zum]

Had to rebuild the kernel with smp support.