how to check cards running loadware in unify OS4000

[persi01]

Need help with OS4000 system cards firmware/loadware

How to identity which loadware running on peripheral Cards e.g.(SLMA24) & one download from unify portal are higher or
lower.

E.g. for SLMA24 i had transfered lastest Loadware under /LG80 folder via start/transfer option in Comwin & restarted the card.

But I unable identify excact version of loadware
Like in Ericsson PBX we used get display of each cards loadware. Is there something like this in unify OS4000.

 

[donb01]

Assistant
Expert Mode
Gateway Manager
Change the "IP Boards" parameter to "All Boards".

It comes up by default showing just the STMI and NCUI boards, but will show you them all if you tell it to show all the boards. You can also use this to push out new loadware to the boards if that ever becomes necessary.

There is also an AMO that will allow you to list that stuff, but I would have to go looking for it - I prefer the nice interface in assistant.


Don Bruechert, Voice Comm Analyst II
CareTech Solutions @ Holy Family Memorial
Manitowoc, WI, USA

 

[sbcsu]

Yes the assistant one works better in this case.
To put new loadware into the 4K you have to open the file transfer in Comwin