How to Change Time on IPO with Only 7316E Sets No Avaya Sets 2

[pccal]

How do you change the time on an IPO that is only provisioned with 7316 sets & digital cards? I know how to do do it with user rights using Avaya sets but I can't find a time & date setting after giving 7316 sets the proper user rights.

 

[TouchToneTommy]

Connect to the network. Set the DNS server address, time setting to SNTP, use pool.ntp.org, set your time offset, make an IP route to hit the gateway for the network

 

[pccal]

Sorry I should have been more specific. Small customer with no network to put it on.

 

[infonaut]

pccal:
We share the same congruence where no network exist. Fortunately a slot in main chassis and comb card was available, 1408
and wholla.

 

[Gunnaro]

Or put in a beaten pc, install VMPro and set that as a time source on the IPO.
(You don't need a license to run VMPro as a time source).

Works pretty well, even if the pc is not in contact with the outside World.

Kind regards

Gunnar
______________________________________
Mille viae ducunt homines per saecula Romam