Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How To Change Ring Options??

Status
Not open for further replies.

NyghtTech

Programmer
Feb 1, 2006
32
US
how to i change the rings type so when someone calls in on an outside line it is not the same ring as if someone calls me on an icom.
 
They should not be the same. An inside call (intercom) should be 1 long ring - pause - 1 long ring. An outside call should be 1 short ring, followed by 1 long ring. You can change the way a particular phone rings by choosing 1 of 8 ringing oprions - but that option only helps distinguish that specific phone from other phones. Regardless of the ringing option chosen, the type of ring for inside and outside calls will be similar - except for what I mentioned above.

Tom Daugirdas,
President
STCG, Inc.
stcg.com
 
Well, actually, an outside call does - RING - BEEP, a transfered call does RING - BEEP- BEEP.

And, as TOMD says, there are 8 different ring patterns available.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top