Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How to change phone type
- Thread starter steeltech
- Start date
Johnthephoneguy
Technical User
Unless you are release 5, you will have to out the phone then rebuild it as the type you want it to be, no shortcuts on that.
JohnThePhoneGuy
"If I can't fix it, it's not broke!
JohnThePhoneGuy
"If I can't fix it, it's not broke!
acewarlock
Technical User
It shows up when I PRT a certain TN"
I have to ask, why did you print this TN?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
I have to ask, why did you print this TN?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
911guru
Programmer
- Nov 10, 2007
- 437
I see that a few folks were talking about 5.00 and the new CHGTYP command was referenced in a prior post.
Note that this is a great new command, but only valid for IP phones. It won't work for the 3903/3902 set this user is dealing with.
911Guru
Note that this is a great new command, but only valid for IP phones. It won't work for the 3903/3902 set this user is dealing with.
911Guru
- Thread starter
- #8
- Status
Similar threads
- Locked
- Question