How to change IP provisioning on BCM 400

[CCNPM]

I have a BCM 400 and currently the IP provsioning is set to DHCP however it needs to be changed to Static. I have not changed these settings before and am unsure of what steps to take. Any help will be greatly apprciated.

Thanks

 

[madwok]

Nor sure of what version as it is very different from 3.xx to 4.0 .

For ver 3.7 - The network update wizard to change the IP might be the best way .

Check on DHCP /Global Options for IP set

such as Nortel-i2004-A,xx.xx.xx.xxort,x,x,....

with xx.xx.xx.xx as your new fix IP

For 4.0

Configuration/network interface/ Interfaces ( bottom tab ) /Ip setting - Just modify . Make sure that you highlight the LANx that you want to publish which usually LAN1

If you have IP sets also check

Data Service/DHCP server/IP terminatl proxy S1 , S2

You might want to do a full reboot after changing the IP.

Weird things happen if you do not reboot it !!!