Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how to activate nat loopback in PIX 501
- Thread starter Jefhandle
- Start date
Post your config and i Might be able to help you out. Are you using Nat? If so do you have statics set up? And if you are using statics are you pinging the NATed ip of the webserver? Also if you dont want to ping via the NATed address Look into the Nat (inside) 0 command
Supergrrover
IS-IT--Management
Just to confirm, you have a server on the inside that your internal clients are trying to reach via an external DNS server's record.
The pix won't do loopback. It will do DNS alias.
As the DNS response traverses the pix this doctors the DNS server's response to the internal client with a new internal IP for the resource.
Brent
Systems Engineer / Consultant
CCNP, CCSP
The pix won't do loopback. It will do DNS alias.
As the DNS response traverses the pix this doctors the DNS server's response to the internal client with a new internal IP for the resource.
Brent
Systems Engineer / Consultant
CCNP, CCSP
- Status
Similar threads
- Locked
- Question
- Locked
- Question