How to access the CCMAdmin page?

[snootalope]

Just finished an install of CUCM 6.0(1a) and can't get into the admin page..

I've tried http and

https://<IPADDRESSS>/CCMAdmin

and /CUCMAdmin

Keeps telling me page can't be loaded. I can ping the IP of the server and it works just fine. From what I can tell, the server boots just fine with no errors or anything. Goes straight to the login prompt on boot.

Have they changed something in 6.x? Is there a way I can tell what services are running or posting an error?

Maybe I've just got the wrong URL??

Thanks for any help!

 

[JcBWF]

Try CCMAdministrator

 

[ADB100]

I recently built a test CCM6 system on a HP DL320-G2 and apart from the Certificate not being trusted I managed to access the server immediately after installation using

https://dns.name/ccmadmin

without any issues.
During the installation it complained about it's IP address not being resolvable to its hostname via DNS. There was the option to ignore the error and continue but I chose to retest and added it to DNS. I know linux is a bit awkward about its IP address/hostname and name resolution so it could be this? Can you SSH to the server as you can access various settings from the CLI (utils system network etc).

Andy

 

[snootalope]

Well, turns out it looks like something went wrong during the installation.. I was using DMA to import data from a 4.1.3 machine. I did the setup without importing and it went just fine, I could access the ccmadmin page. However, I couldn't get logged in! UGH! I tried the CCMAdministrator and the password I set during setup..

Fun fun

 

[pndscm]

I have done the upgrade procedure from CCM 4.1.3 with no problems a couple times in my lab. But I was only importing around 10-15 phones also.

Possibly you just ran into a small problem that made it fail.

 

[snootalope]

yeah, the system I tried installing 6.x on did take 5.x just fine along with the imports, but I'm thinking I'm lacking enough memory. It's only using 1.5GB with 36GB HDD's. Plus it's VMWare. I know, it's not supported, but it was just a lab.