Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
how may CIL-Records on AAU?
- Thread starter lalrl
- Start date
Hi lalrl,
From the ACAB manual:
The default size of the buffer in the file system is 2 MB and with a SMDR record size of 113 bytes (for MD110) this will give a storage capacity of over 17 000 records in ASCII format. When compression is activated the compression ratio is typically between 2:1 and 6:1 depending on the data load (number of records to compress at a time). The higher load the larger block of data to compress before writing to file and the better compression ratio.
/mk
From the ACAB manual:
The default size of the buffer in the file system is 2 MB and with a SMDR record size of 113 bytes (for MD110) this will give a storage capacity of over 17 000 records in ASCII format. When compression is activated the compression ratio is typically between 2:1 and 6:1 depending on the data load (number of records to compress at a time). The higher load the larger block of data to compress before writing to file and the better compression ratio.
/mk
- Status
Similar threads
- Locked
- Question