Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How Many Paging Zones Left?

Status
Not open for further replies.

rtetryyt

MIS
Feb 14, 2008
117
US
I have a G3si and I was wondering how I check to see how many available paging zones I have. Thanks Tj
 
It shows that I have 9 and they all seem to be in use.Do I just buy another card or something?
 
All Definity & Call Managers max out at 9 zones (plus an all-zone). You could go with either station or trunk level access.

Kevin
 
Sorry I am a bit of a newbie. What do you mean by station or trunk level access?
 
Most paging systems are configurable to be connected to the PBX using an AUX port (TN763), an analog station port, or an analog CO trunk port. Assuming station paging, a user would dial the extension number associated with paging. You can use COR to limit who can dial that station. Same with trunk access.

You may want to consider a paging unit that does zone control within the unit either.

Kevin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top