How long a phone has been registered 1

[telebub]

Hello, is there a command in the CS1K or Element Manager that will provide a stat of how long a particular IP phone/TN has been registered to the node?

 

[yyrkroon]

I could be imagining things, it has been a while since I had to deal with Nortel IP phones - but on one of the phone options, network status - there should be an uptime.

 

[Firebird Scrambler]

The BCM system has that option in it's monitor tool. I would have thought that there was a command listed somewhere in LD 117.

This command below shows the MGC on line time.

=> STAT IPMG
LAST REG LAST REG
IPMG TYPE STATUS DATE TIME UPTIME
004 0 MGC REG 10/11/2016 01:12 132d,8h,25m
004 1 MGC REG 10/11/2016 01:12 132d,8h,25m

=>



Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website =

http://somertel.com

linkedin

 

[SherWat]

If you want to know the uptime of a set then yes - in Element Manager.

Go to IP Network --> Maintenance and reports --> GenCmd --> group is iSet and Command is isetShow

It shows the set information and there is a column for Up and Time.