Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How I can insert a "0" before the next number in a HiPath 4000?
- Thread starter loperajr
- Start date
Log on via ComWin
REG-KNPRE;
It is the KNPRE that inserts the lead 0
Examples as follows:
International calls - puts 0 00 before displayed number
ADD-KNPRE:0&&15,ISDN,INTERNAT,0,00;
National calls - puts 0 0 before displayed number
ADD-KNPRE:0&&15,ISDN,NATIONAL,0,0;
Local calls - puts a single 0 before displayed number
ADD-KNPRE:0&&15,ISDN,SUBSCR,0,;
REG-KNPRE;
It is the KNPRE that inserts the lead 0
Examples as follows:
International calls - puts 0 00 before displayed number
ADD-KNPRE:0&&15,ISDN,INTERNAT,0,00;
National calls - puts 0 0 before displayed number
ADD-KNPRE:0&&15,ISDN,NATIONAL,0,0;
Local calls - puts a single 0 before displayed number
ADD-KNPRE:0&&15,ISDN,SUBSCR,0,;
- Status