How do you initialize a panasonic 1232?????? 2

[guerrerotech]

I'm looking through all the manuals and it seems they are all user guides.

 

[cwc3]

goto

http://www.wedophones.com

 

[bason]

set to switch clear.
Power off/on , set switch to normal,
when light on permanent system is default

 

[cwc3]

That is not the proper procedure !

 

[bason]

So just clarify it !
Thats if you want to help !!

 

[cwc3]

Hey he must have found it in manual ,do you think ?

 

[meanmofo]

1. Set the power switch to “OFF”.
2. Set the system clear switch to “CLEAR”.
3. Plug the AC power cord into the system and an AC outlet.
4. Turn the power switch on.
5. Press the Reset button with a pointed tool.
(The power indicator will flash.)
6. Slide the system clear switch to “NORMAL” while the power
indicator is flashing (approximately within 10 seconds).
The system will be initialized with default values. The system will
also check the CO lines, extensions, and optional cards and units.

 

[cwc3]

cut and paste works nicely !

 

[meanmofo]

Indeed
However, it answers the OPs question whereas your comments border on trolling!

 

[cwc3]

don't even know what trolling is why don't you find it in the manual for me so I don't have to read it!