How do you connect to the PBX via LAN

[Motorhead777]

How do you setup the end user PC's to connect to the S8100 PBX via a LAN? We can ping the IP Address of the CLAN on the PBX but we cannot telnet to it or run ASA to administer the PBX. Any suggestions?

Thanks.

 

[diadora321]

hi ,

you can use with this tables :

1: change node-names ip ( input the ip address of your pc )
2: change ip-services ( input SAT with your PC and Port 5023 with c-lan in the same line )
3: connect to the ip-address with telnet port 5023 via telnet from your Pc .

by ,
diadora321 .

 

[Ecky]

You could use Terranova to do the trik.
1. Add "2350 Telnet" to file Terranova/Device/TCPPorts.def
2. Start Terranova go to Controls/Line Options and set the port to LAN*.
3.set the IP of the server and connect.
4. Login to the PABX

C'est tout ;-))