SurferdudeHB
Programmer
Sorry for the newb question but how do you change the password to login into a 96xx IP phone?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do you change station login password? 1
- Thread starter SurferdudeHB
- Start date
- Status
-
1
- #2
- Thread starter
- #3
SurferdudeHB
Programmer
Thank you Kyle.
Also, how do you know if you can plug in a pc into the network of a 96xx phone? What setting in the station form needs to be enabled to do that?
Also, how do you know if you can plug in a pc into the network of a 96xx phone? What setting in the station form needs to be enabled to do that?
none. default should work, but lookup PHY2STAT in the 46xxsettings file. anything PHY2 in there relates to the PC port.
By default it'll pass through I think. Though lobby phones would be part of a "group" in the settings file that would usually lock the port down.
Presumably your phones should be tagging with the voice vlan ID - learned thru LLDP or DHCP option 242 from the data vlan, and the PC will pass through untagged frames and your data switch would allow frames tagged with the voice vlan in the voice subnet and untagged frames default to whatever subnet you use for PCs.
What are you trying to do? Don't piss off your network guy if you're not familiar with this stuff and put a few hours in to sort out the concepts.
Required bathroom reading:
By default it'll pass through I think. Though lobby phones would be part of a "group" in the settings file that would usually lock the port down.
Presumably your phones should be tagging with the voice vlan ID - learned thru LLDP or DHCP option 242 from the data vlan, and the PC will pass through untagged frames and your data switch would allow frames tagged with the voice vlan in the voice subnet and untagged frames default to whatever subnet you use for PCs.
What are you trying to do? Don't piss off your network guy if you're not familiar with this stuff and put a few hours in to sort out the concepts.
Required bathroom reading:
DAVIDPAYNE
IS-IT--Management
If you are talking about the network pass-through port on the phone. it is enable or disable in the 46xxsetting file.
- Thread starter
- #6
SurferdudeHB
Programmer
Just want to know if the user can plug in their pc into the phones. THx
montyzummer
IS-IT--Management
There is no setting on the station form as Kyle points out it is controlled from the 46xx settings file , plug a pc in and see if you get an IP address , there is nothing that will go wrong , if you get a IP check to see if it is the same range as the phone , if it is the network team will need to look at Vlans on your data switches as you may get quality issues if they are not segragated.
ACSS (UC/SBCE/SM/SME)
Not that they mean a thing anymore , get a brain dump pass the test crash the system.
ACSS (UC/SBCE/SM/SME)
Not that they mean a thing anymore , get a brain dump pass the test crash the system.
- Status
Similar threads
- Locked
- Question