How do you change overhead page number?

[kellygirl01]

Hi All,

Using Meridian opt11c, using overhead page using 61, 62, 63 for three different overhead speakers and 64 for all of them at once.

I need to change these numbers how do i do it?

Any help would be greatly appreciated.

 

[phonedude10]

YOUR ACOD FOR PAGE RT MUST BE 6 AND YOUR ZONES ARE PROBABLY 1-4. YOU CAN CHANGE YOUR ACOD IN LD 16 BUT YOU PROBABLY CANNOT CHANGE THE ZONE NUMBERS.

 

[kellygirl01]

Exactly, I need to change the ACOD for PAGE RT, so it's something like 31,32,33 and 34 for all.

What commands do i have to perform to get to the ACOD so i could change it?

 

[phonedude10]

LD. 16 REQ=CHG/TYPE=RDB/RT=ROUTE NUMBER/ACOD=3OR WHATEVER
NUMBER YOU WANT IT TO BE AND RETURN THRU THE REST.

 

[sandyml]

Keeping in mind, 3 must be unused in your PBX to do this. You can determine what if anything is already programmed by printing LUDN in LD 20.
REQ: PRT
TYPE: LUDN
CUST 0
DN 3
If there is anything beginning with 3, it will print out and you would need to do some reprogramming.