how do you back rever sp3

[winkshog]

have problem of users log-on timing out and the are sitting on the same switch as the server so was I was going to back rever to see if that would fix the problem.

any thoughs would be great.

 

[Lou0686]

Hi,

See TID 10016901 on Novell's webside for backrev instructions.

Lou

 

[Psychoid]

I doubt that your user's problem is because of SP3.

The first thing that I'd check after the very simple things would be that SLP was set up right and that the user's Novell client has a static entry for the SLP DA

------------
Bill
Consultant / Network Engineer
CNE, CCNA

 

[winkshog]

I though that the SPL DA whet on the main server not all the servers?

I never set up the SLP DA on any of the servers. I only have this problem in one office. where there is a 4.0 4.11 6.0 netware servres the 6.0 server is the one that i am haveing problems with.

 

[Psychoid]

Here is Novell's documentation on SLP:

http://www.novell.com/documentation...mentation/lg/nw6p/scommenu/data/hg2i9c88.html

It is advisable to have a DA in each remote location. I would also hard-code the DA's IP address in to the Novell clients. Big Red N --> Properties --> Service Location



------------
Bill
Consultant / Network Engineer
CNE, CCNA