How do I telnet both ways through 501 Pix?

[franksoprano]

Can someone please tell me the exact steps & commands I need to take to allow telnet access to a server that is behind my pix, I wold like to allow www, ftp & telnet to the box..

I have tried using the PDM and have not had any success, I keep losing my other connections that are running..


Thanks in advance!

 

[yizhar]

HI.

When using the STATIC command, you must not overlap with the address used by the pix interface nor the address used by the GLOBAL command, unless you are using port forwarding (STATIC TCP...).

Using nat, global, static, conduit, and access-list Commands and Port Redirection on PIX:

http://www.cisco.com/warp/public/707/28.html

Bye
Yizhar Hurwitz

http://come.to/yizhar

http://teachers.sivan.co.il/yizhar