How do I setup Exceed to have an x-window to a Sun server 2

[scorney]

I'd like to have an x-window of 1 of my remote server.

I can telnet

http://www.xxxxxxxxxx.com

port# , this work

but Can I have an exceed session, I tried many way but I'm a newbie on that and I heard that It would be way better than a regular telnet, as I'm suppose to have the same screen as if I would be at the real terminal.
Is someone could help me on that ? like I said I'm new to this.

Thanks,
Sylvain

 

[bfitzmai]

Do you have the IP address and machine name for the PC that is running Exceed in the Sun Server's host table?

 

[KenCunningham]

I don't think you should need that, just export DISPLAY=<Ip address>:0.0 in a login script somewhere. At least, that's what works here.

 

[scorney]

Yes I did but I always got a pop up windows "Xstart Client Startup Application" Unable to connect to host using specified start method.

ok I tried RLOGIN - REXEC - TELNET no luck
I tried X WINDOW and TERMINAL EMULATION no luck
Why it ask me for a command ? like I said I'm really new to this.
If i could have a template or a shortcut would be nice, so that I just need to change the IP and login information.

 

[Mike042]

I successfully connect to Solaris systems (and other flavours of UNIX) from my PC, running Hummingbird Exceed (currently we use version 8.0 though later versions are available). It does use TELNET, so that has to be allowed on the Sun System. (it is by default)
On the PC, make sure the "Exceed.exe" is running to allow X-Windows to be "sent back" to the PC (it runs as a minimised icon). In "Hummingbird Neighborhood" click the "New HostExplorer Profile" Icon and enter the details of the Sun system (change Profile Type: to VT). Clicking on the newly created Icon then presents the "Login:" prompt from the Sun system. And away you go . . .

I hope that helps.

Mike

 

[scorney]

Hello Mike042,

This is a regular Telnet without having to type telnet this way I know and it worked for sure.
But a X-Window is a better way to be right in front of the server even remote.
let me explain: On that server if I right click on the screen I have some option but If I do a regular telnet or Hummingbird it does not give me this capability. This I want to be like at the server but remotely. Again it's an x-window...
It's not that easy to explain, but I'm trying..

 

[kHz]

What version of Exceed?

Below is the text of a document I wrote to setup Exceed.
****************************
Using Exceed X Server with SSH X11 Tunneling

Step 1: Install and configure Exceed on your PC

Step 2: Configure Exceed for Passive Mode and Multiple Windows

Exceed’s passive mode allows you to start the X Server on your PC without it making any initial attempt to connect to a specific remote host.

Set Exceed to use Passive Mode and Multiple Windows Mode. Both of these settings are Exceed defaults, but check the settings if Exceed has been used before.

1. Start -> Programs -> Hummingbird Connectivity 9.0 -> Exceed -> Xconfig
2. Set Passive Communications:
a. Click the Network and Communication link. This will open the Communications dialog box.
b. Select Passive from the mode field’s drop-down list.
c. Validate and apply changes (green checkmark on toolbar).
3. Set Multiple Windows Screen Definition:
a. Click the Display and Video link. This will open the Screen 0 dialog box.
b. Click the radio button beside Multiple in the Window Mode box in the upper left.
c. Validate and apply changes (green checkmark on toolbar).

Step 3: Configure Localhost Security

When using SSH X11 tunneling, the only host that Exceed will ever talk to is your own PC – the localhost. Thus, regardless of which or how many machines or accounts you’re going to use Exceed with, you only have to tell Exceed to answer to one machine – your local host.

1. Click the Security, Access Control and System Administration link. This will open the Security dialog box.
2. In the Host Access Control List section of the Security dialog box, click the radio button that is to the immediate left of the word File.
3. Click the Edit box to the right of the name xhost.txt. A NotePad editing session will be initiated, editing the xhost.txt file.
4. Type localhost on a new line in the file.
a. If your xhost.txt file already has other specific hosts listed, delete those lines.
5. Save your changes to xhost.txt by clicking File in the menu bar, then selecting Save.
6. Leave NotePad by clicking File in the menu bar, then selecting Exit.
7. Validate and apply changes (green checkmark on toolbar).

Step 4: Unconfigure your Unix Account

If you have set your account to talk to your X Server, you have to remove these settings before you can use it with SSH X11 tunneling.

For Korn/Bourne shell users, check your .profile file, and remove any lines that look like this:
export DISPLAY=xxx.xxx.xxx.xxx:0

After that, and X-Windows window will automatically open whenever you start an X-Windows program on any remote Unix host.

A good X-Windows program to test with when you first setup Exceed is xclock. On your Unix host using your Unix account, enter: /usr/X/bin/xclock &
and a small X-Windows window containing a clock will open on your PC’s screen.

Using Exceed X Server with SSH

When using telnet, passwords will be sent across the network in plain text and can be viewed with other network traffic using a sniffer or other methods. This is an example of the password being intercepted using the Solaris snoop utility:

158 12.50892 xxx.xx.xx.xxx -> myhost TELNET C port=665 X&d2k7GG\r

Where “X&d2k7GG\r” is your password with a return at the end. Using the Secure Shell start method will eliminate sending your password in plain text across the network.

1. Start -> Programs -> Hummingbird Connectivity 9.0 -> Exceed -> Xstart
2. In the Start Method box in the upper left, select Secure Shell (Set Display).
3. Enter the host in the box to the right of the word Host.
4. Enter the host type in the box to the right of the words Host Type by selecting Sun in the drop-down box. Then select the command to use by clicking on the ellipsis button and selecting XTerm. This will populate the command line with a predefined xterm command line.
5. To the right of the Information prompt, select the radio button labeled None.
6. In the Secure Shell Profile: field in the upper section of the xstart session, click on the ellipsis button. This will launch the Open Tunnel application.
7. In the lower left corner, click on the Add New Tunnel button. In the Tunnel name: box enter the name for your new tunnel.
8. Using the drop-down list in the Host name: field, select the host for your new tunnel.
9. Enter your Unix account login in the User name: field.
10. In the TCP port: field leave the default of 22.
11. After entering the information for the new tunnel, click OK.
12. This will add the new tunnel to the list. With your new tunnel highlighted, click Open in the lower right. The Secure Shell Profile: will now use this tunnel when opening a connection to your Unix host.

When you start Unix client connection using the Xstart Client Startup Application, you will be prompted for a Password Authentication. Enter your Unix account password and you will receive a secure connection to your Unix host.

 

[KenCunningham]

kHz, a star for your meticulous explanation and the clarity of it.