Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

how do I set DCFW on an 1140 1

Status
Not open for further replies.

moggers

MIS
Apr 29, 2008
39
GB
Hello, due to the wonderful snow I'm working from home today. I have a call forward set up to use on my 1140 in the office but I can't get there to push the CF button. Is there anyway by using DCFW (other other means) on my extension to forward the calls that way? I don't want to OUT my extension to create a nphantom one. If there is no other way then I'll just have to stay 'out of reach' :)
thanks
 
DCFW only applies to Phantoms. For today...If you need to CFW a DN remotely, you can NUL the DN from the phone and put it on a phantom TN for the day.

In the future, you should consider this:
[©] GHTROUT.com [⇔] Resources for Nortel Meridian/CS1000 System Administrators - You Can Hire Me Too
 
I just wanted to say thanks to GHTROUT, even though the answer is not what I wanted it has saved me lots of time looking.

Thanks again

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top