How do I reset an M7324 (or M7310)?

[CentennialMan]

Is there a way to erase all of the programming on the set itself, and restore it to 'factory defaults'? I assume that there is a factory default configuration - Line1 would appear on a specific button, and so on. I am not talking about resetting the KSU itself; I know how to do that.

 

[YnotPhone]

Factory Default have 2 lines - appear and ringing on set.
The rest of the buttons are pre-programmed for features on the system.

That is what I recall.

It's either that - or FEATURE * 1, press the button and OK to clear the buttons. But every button has to be erased this way.

 

[fireeater]

if you want to reset the set (button wise) make sure that set relocation is off
plug in a 7100 or 7208 then lug back in the 7310



_____________________________________
S.H.A.D.O.
_____________________________________

mike

 

[YnotPhone]

Fireeater is right... I forgot that way, I never carry around a 7100 set. That would be a faster way to reset buttons.

 

[CentennialMan]

Thanks for all of the input. Not sure about the F*1 solution, because that's documented to program an outside autodial onto a memory button. We don't have any M7100s or M7208s either, but will purchase a couple and try it. How about plugging in a FastRad? Would that have the same effect?

 

[fireeater]

if a 7310 is the set you want to redo then plug in any other set even a 7324
just needs to be a different set type

fast rad will not do it

the feature *1 is for external speed dial ,but is also the erase button code
normal
f*1
press button
dial phone number
press ok (or hold button)
button is programed with the number

erase
f*1
press button
press ok (or hold button)
butoon is now blank

_____________________________________
S.H.A.D.O.
_____________________________________

mike