How do I register my 2610?

[JBruyet]

Hey all, I purchased a ProCurve 2610 switch, got it all configured, and it's working great. HOWEVER, every time I telnet into the switch I get this message:

Please register your products now at:

http://www.ProCurve.com

I then hit ENTER and login. When I'm telnetting into the switch it's a minor annoyance, but when I try to use my Solarwinds software to login to that switch the "annoyance" prevents me from logging in successfully. SO, how do I "register" my switch so that error message goes away?

Thanks,

Joe B

 

[svenmontgomery]

Strange I get the register info but also prompted for username.
------------------------------------------------------------
ProCurve J8698A Switch 5412zl
Software revision K.14.34

Copyright (C) 1991-2009 Hewlett-Packard Co. All Rights Reserved.

RESTRICTED RIGHTS LEGEND

Use, duplication, or disclosure by the Government is subject to restrictions
as set forth in subdivision (b) (3) (ii) of the Rights in Technical Data and
Computer Software clause at 52.227-7013.

HEWLETT-PACKARD COMPANY, 3000 Hanover St., Palo Alto, CA 94303

We'd like to keep you up to date about:
* Software feature updates
* New product announcements
* Special events

Please register your products now at:

http://www.ProCurve.com

Username:

------------------------------------------------------------

 

[kwing112000]

you could try logging into the web interface on your 2610 and you will get a registration window. check the box off for dont remind me or something like that.

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[JBruyet]

I posted this question on my HP forum and received a response stating that I would have to use a script with a Carriage Return in it in order to get past the window. Sounds like the login is a little different between our switches.

Thanks,

Joe B

 

[kwing112000]

I just telneted into mine and it is the same. my post was wrong..

Kevin Wing
ACS- Implement IP Office
ACA- Implement IP Office
Carousel Industries

 

[JBruyet]

Bummer. I was hoping to automate access to my switches but I guess that's not going to happen. Oh well, at least I can still do it the old fashioned way.

Thanks,

Joe B