How do I program additional intercom keys in a set

[faelo]

How do I program additional intercom keys in a set. I know how to program buttons using feature 3 but I don't know if there is a feature for intercom keys. I have a CICS O/S 4.2

 

[MarvO1]

You have to go into Config, TERMINALS and SETS, Line Access, Show, next,next, next, until you see Intercom keys, Hit change to get the value you want.

MarvO said it

 

[mroberts]

Feature * * 266344, password: 266344
Terminals&Sets - Press the upper right button that has lit up on your phone.
Show set: ___ - Enter the extension number
223:223 - Press the upper right button lit up on your phone
Line Access - Press the Upper right button
Line assignment - Press the Lower right button lit up on your phone
LinePool Access - Lower right
Prime line: IC - Lower right
Intercom keys: 2 - Press the change button in your display to add additional keys. Hang up when done. The buttons will be automatically assigned to the phone

MRoberts
mroberts@americaii.com

http://www.a1teletronics.com

 

[mroberts]

We gotta quit meeting like this MarvO! ;-)

MRoberts
mroberts@americaii.com

http://www.a1teletronics.com

 

[MarvO1]

MR, You said that procedure so much better than I did, but I type at 3 words per minute, so still took me longer than your 90 WPM.

MarvO said it