Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do i link two computer by crossover ?
- Thread starter babaF
- Start date
Well all you will need is a crossover cable, which is wired differently at each end rather than the same eg:
Then it is just a simple case of setting up the networking setting on the 2 machines as normal.
Then it is just a simple case of setting up the networking setting on the 2 machines as normal.
-Well all u need to do is connect the two computers with a cross cable and if you have a HUb, then you have to connect the two computers to the Hub with the straight cables.
-Make sure the Workgroup name on both the computers is same but are having Unique names.
-Log off and log on into both the Computers as the Registered USer o administrator.
-Make sure the Workgroup name on both the computers is same but are having Unique names.
-Log off and log on into both the Computers as the Registered USer o administrator.
- Status
Similar threads
- Locked
- Question
- Locked
- Question