Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I identify a DID number for an extension?
- Thread starter icsystem
- Start date
The easiest way is to go to >TELEPHONES/SETS and look up the phone you want the information for.
Go to LINE ASSIGNMENTS and do a "list" for "find" I can't tell you off the top of my head what it will ask, but when you do that you should see a line 145 or above listed.
then go to LINES, from the main menu and look up that line and then look for the target number.
Hope this helps.
John
Go to LINE ASSIGNMENTS and do a "list" for "find" I can't tell you off the top of my head what it will ask, but when you do that you should see a line 145 or above listed.
then go to LINES, from the main menu and look up that line and then look for the target number.
Hope this helps.
John
There's another way that doesn't require the installer password. Feature **SET lets you show the lines assigned to any set. Feature **LINE lets you see the programming for each line.
Check out "What feature codes are available for the Modular ICS XC 6.1 and CallPilot 150?" in faq799-4558 for other helpful feature codes.
Check out "What feature codes are available for the Modular ICS XC 6.1 and CallPilot 150?" in faq799-4558 for other helpful feature codes.
- Status
Similar threads
- Locked
- Question
