how do i go about creating a forum using coldfusion?

[cfblah]

hi


anyone here knows how to create a forum page using the coldfusion program?If u do, could u verify it step by step or know someone who has done it before or could even type out the cftags for this project..

thank u..

 

[GunJack]

I would recommend using Allaire's own Forums product as it's now free along with the source code. Allaire contracted a third party to keep it available at

http://www.forumspot.org

although I currently show the site is down. If you're interested, I would try there and contact Allaire if the site's not back up soon.

Good luck,
GJ

 

[Thanks]

thanks for the help...

i will be very greatful for ya help..

 

[cfblah]

thanks for the help...

i will be very greatful for ya help..

 

[CFHub]

simplemessageboard.com is also maintaining an "open source" forum in CFML

 

[NetPoser]

cfblah,

Try

http://www.e-zonemedia.com/fusetalk/

It's less than $200 US and is highly configurable with an admin section.

There's no way you can build a forum like this for less than $200. Takes about 30 minutes to 1 hour to install and configure.

Allaire uses this on their site.

Enjoy