How Do I get to CMOS Setup on Compaq Prosignia 200???

[wncads]

What key combonation do I press at boot up to get to the CMOS Setup screen? I have tried the typicals, F12, Del, F1, F2 etc but can never get into the CMOS setup. Any help greatly appreciated. FYI, this is a 5/166 Mhz Model. Keith Buchanan
AplusNetworking.com
Commercial I.T. Networking & Wiring Specialist
keith@aplusnetworking.com

 

[Visitor]

Thought for Compaqs it was always F10 when the square 'cursor' flashes in the upper, right corner of the screen.

 

[entrease]

The F10 might only work if you've set this server up with the smart start CD and setup the EISA partition on the hard drive. If this hasn't been done I believe you can use the following link and download the sp to create diskettes to do the same thing.

http://www.compaq.com/support/files/server/us/download/9850.html

Hope this helps!
Aaron