How do I get other clients to use my mod?

[pronet74]

I created a change in the one form using flexibility. I then tried running setup.exe from the macola\instflex directory on a client computer. It installed, but when I would run Macola it would say Btreive not loaded. I had to then run the PSQL Client to get it to start macola up again, but the mod wouldn't work and the vba/ide button wasn't enabled. Am I doing something wrong?

 

[MacolaHelp]

under vbaprj each user that needs oe0101.o must have their own folder with the project. If all users need, then put under a macola folder. Install pervasive, macola & flex on each workstation that must run it. I have heard some vba gurus have not needed to install flex, but . . . There is also a default oe0101.o project that comes with a vanilla macola install that you usually have to delete as well. Double check your pervasive client setting on the workstation & make sure they are okay.

 

[pronet74]

I had it running good on a test server, so do I need to install flex on the production server as well? I noticed there was no vbaprj directory on the macola directory on the production server, only the test server.

 

[dgillz]

Flex must be installed on the server and the flex client ust be on all workstations that will use this program.

Software Sales, Training, Implementation and Support for Exact Macola, eSynergy, and Crystal Reports

http://www.trianglepartners.com

 

[stravis]

The vbaprj directory contains all of your project code. In order to deploy your Flexibility application you will need to copy the vbaprj directory over to your production server (this is not created when you install Flexibility unless you choose to install the demo applications).

Scott Travis
infoSpring, LLC.