Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How do I fix the NT4 server with ERD?
- Thread starter BMW
- Start date
First of all, make sure your ERD is current. If not, it will revert your server to it's configuration at the time the ERD was updated.
It's real simple. Either boot the Windows NT CD or the 3 floppies as if you were going to reinstall NT. During the process, it will ask you if you want to install a new copy of NT or repair an old one. Select "R"epair. It will then ask you for the Emergency Repair Disk. Just insert it and follow the screen instructions.
Hope this helps ...
- Bill
"You can get anything you want out of life, if you'll just help enough other people get what they want" - Zig Ziglar
It's real simple. Either boot the Windows NT CD or the 3 floppies as if you were going to reinstall NT. During the process, it will ask you if you want to install a new copy of NT or repair an old one. Select "R"epair. It will then ask you for the Emergency Repair Disk. Just insert it and follow the screen instructions.
Hope this helps ...
- Bill"You can get anything you want out of life, if you'll just help enough other people get what they want" - Zig Ziglar
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question
- Locked
- Question