Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I convert BUG 4046 message?

Status
Not open for further replies.

jaxuser

Technical User
Apr 6, 2006
320
US
I am a dummy when it comes to Hex conversions; I've read threads on this error but have not been able to successfully convert the message that I am getting. Any direction is greatly appreciated.

BUG4046
BUG4046 : 00000009 00000004 00000000
BUG4046 + 00B04334 014579DD 014578AE 013BE912 013ADE95
BUG4046 + 013ADAD8 013AB469 013AA017 01372973 0137171B
BUG4046 + 0136EE6B 0136D688 0136CF80 01237FE3 01241FF2
BUG4046 + 01241F3D 0123FBA5 01236A35 00B95061 00B91A60
BUG4046 + 00B9161A 01CE68FE 01CDF8F6 132DED4A

Thank you!
 
I found this old record, but not sure if it's related.

This BUG is printed because this node received a FACILITY message on a dch, asking us to perform TAT. But at our node TAT is not configured as an RCAP, therefore we print the bug4046. remove tat from far end dch rcap.

NB: TAT requires an MSDL-based DCH for the feature to work. The NTAK79 PRI card on small systems will not support TAT.



Firebird Scrambler
Nortel Meridian 1 / Succession and BCM / Norstar Programmer in the UK
Advance knowledge on BCM support
 
Thank you; don't have TAT in RCAP; will keep looking.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top