How Do I Connect A KX-TDS100 To A BT ISND2 Line?

[aston101]

Hi,

I hope someone here can help me.

I have puchased a Panasonic KX-TDE100 Phone System with 6 Phones from EBAY. I have also puchased a KX-TDA0288 (8 Chan ISDN2 Card) as I have been told that I will need one of these also.

The office that this came had a Single Analouge Phone Line coming into the building.

I need to install this into a new office.

So far we have had 6 CAT 5 Lines run from each office to where the KX-TD100 will be located next to the BT ISBN 2 Box which was fitted by BT.

Each of the cables DOES NOT have any plugs on them just bare wires.

Can anyone give me some help or instructions (for a novice) to wire this up please.

I have never done anything like this before so any newbie help would be nice.

The unit has a HDLC8 Card already installed which a BIG plug with 50 Bare Ended Wires coming out - I think this was connected to there old phones somehow but I dont know how.

Many Thanks For Any Help

 

[obtsystems]

The dhlc card is your extensions, you need a Amphenol to connect this to the telephone cables.
the 4 isdn will have rj45 connectors for the idsn.

what suffex is on the system, is it a E.
do you have the programming tool, the uk isdn uses point to point settings for telephone systems.

getting the phones to work is not hard, programming it to do what you want is easy when you know what you are doing