Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

How do I change the Default Failover DN? 1

Status
Not open for further replies.
Mar 25, 2005
11
US
I have an Option 11c PBX with Call Pilot v2.02. If I take Call Pilot down for maintenance, calls intended for Call Pilot are routed to a particular DN.

How can I change the DN that failed calls go to?
 
Do you know what DN the calls go to????




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
And where is that?




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
LD 23
REQ PRT
TYPE CDN
CUST 0
CDN - enter the CP CDN (main messaging dn)press enter for the rest. look at the DFDN prompt.

Change the DFDN target to what you desire.
 
He didn't give you a star for you great answer so I will.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
I don't understand the relevancy.

You also didn't know the answer to your question and it would have gotten me to the answer but it would have taken a little longer then it took yyrkroon.




This is an Analogy so don't take it personally as some have.

Why change the engine if all you need is to change the spark plugs.


 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top