How do I change a number in a speed dial list

[tjones471]

I have to change a number in a speed dial list and I have no clue on how. Not familar with Opt11 PBX. Was a Definity Man for a long time.. Help Please

 

[cmawbey]

hello
speed numbers can be looked at in LD 20
LD 20
req..prt
type..scl
lsno (list number)
size <cr>
range...<cr> or xx yy (you can print a range of stored numbers)
stor 0 xxxxxxxxxx
stor 1 xxxxxxxxxx
and so on

to change
LD 18
req chg
type..scl (personal speedcall list... SSC for system list)
lsno ... specify list number
dnsz..xx (max number of digits in the numbers that are stored)
wrt <cr>
stor x enter the store number say 6 (to change stored number 6)
stor 6 xxxxxxxx (add new number dont forget a 9 if you need it)
<cr> back to req

this should do yer


Colin

 

[fizzywig]

Just an FYI...Nortel says never ever change speed call list always out and rebuild. You can cause corruption.

 

[cmawbey]

Hi
never heard that myself, but it may well be true,,,,
i have changed many speed call lists and as yet never had a problem, but there is always a first time....your choice.


Colin

 

[fizzywig]

I don't know, this is what the instructor said at the Nortel Training. Just passing it on. Much like the changing of ACD phone, they say that can also cause corruption.

 

[cmawbey]

I heard what you say, i know meridian mail can corrupt by just changing the name,,, has anybody else had a problem changing speed lists ???

rebuilding can be a pain if your list is very large... Colin