How do I attach my Startalk flash module to my 8X24 Norstar system 1

[mcjdaddy]

I have never wired the flash into my phone system. I assume it goes into the 66-block but I am not sure how or where?

 

[luv2ski]

wire ports to rj11 then line cords to flash

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[mcjdaddy]

I have a port 1 and 2 on the flash. After I wire an RJ-11 to it then where do I punch the other end of the cables to? A tip and ring on the 66-block.

 

[luv2ski]

digital port on 8x24 to rj11 to vm.make sure port programmed correctly"no lines no fna no hunt no answer dn no page no pickup group 2 icom buttons ect ect

Pat Guido
NEXTIRAONE
Pat.guido@nextiraone.com

Formerly Nextira, formerly Williams Communications, formerly Wiltel, formerly Nortel networks, formerly Northern Telecom, formerly, Nynex meridian systems formerly Northern Telecom.

 

[jerryreeve]

look at faq799-1780 select one of the station ports on the first 66 block that is unused and punch down on that to your rj-11. LOL

JerryReeve
Communications Systems Int'l
com-sys.com