how connect 96xx or 16xx with vpn firmware to IP Office

[wooppee]

Hi, is somebody was able to connect yet a 96xx or 16xx directly to the IP Office? im using 8.0.16 on ip500 and rls 3.1 firmware on a 9641 but honestly, I don't know much about vpn tunneling on the ip office...

Nortel option; yes or no, Ipoffice option; yes find a way to do it
ACSS Programer

 

[tlpeter]

For the 16XX phones you will need a VPN tunnel made by routers.
Only the 96XX can do remote worker and build a VPN by them selves (except the 9608)


BAZINGA!

I'm not insane, my mother had me tested!

 

[wooppee]

my phone keep showing discover with the public address of the ipoffice and discover the lan ip address of the ip office... im using static ip on both ends. from both end i can ping each other on their public ip. i enable nat on the ip office, and lan 2 is on open internet with no firewall... remote extension is enable on the network and on the ip extension... still not connected with a 9621 and i tried with a 9641 too

Nortel option; yes or no, Ipoffice option; yes find a way to do it
ACSS Programer

 

[tlpeter]

Remote worker enabled for the user too?


BAZINGA!

I'm not insane, my mother had me tested!

 

[wooppee]

yes

Nortel option; yes or no, Ipoffice option; yes find a way to do it
ACSS Programer