HOW CONFIGURE HP´S SWITCHES TO CREATE VLANS FOR DATA AND VOICE IP

[hdu7]

Hi everybody, somebody knows how configurate HP´s switches, in order to create different vlans for data and voice IP, without having to program the vlans in the IP PHONES. I mean, what I want is avoiding to program the IP PHONES one to one, telling them which is the VLAN which they are.

NOTE: somebody toll me that is easy in CISCO´S switches, because they use the CDP protocol to detect if they are voice or data, so they assign straightly their VLANs.

HOW ABOUT HP´s SWITCHES, and HOW IT IS CONFIGURATE.

Thanks Beforehand

 

[TheBublitz]

Same for HP switchs. Its very easy unless you connect the PC via the ip phone to save cable drops.

Since the phone will only be apart of vlan 2(vlan 1 data vlan 2 Ip for example)

you would configure the port

vlan 2 untagged ethernet 5 (ip phone plugged into port 5)

The phone doesn't need to be reconfigured since its part of vlan 2 untagged. The switch port will strip the vlan 2 tag before it reaches the phone

Billy Bublitz
Integrity Windows and Doors