Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
How can i partition and format C
- Thread starter Thusitha
- Start date
you can try this:
Router> enable
Password: <password>
Router#
Step 2 Enter global configuration mode:
Router# configure terminal
Router(config)#
Step 3 Enter the partition {slot0: | slot1:} [partition-number] [partition1-size] [partition2-size] command:
Router(config)# partition slot1: 1 2 4
The partition size is expressed in megabytes (MB).
Router> enable
Password: <password>
Router#
Step 2 Enter global configuration mode:
Router# configure terminal
Router(config)#
Step 3 Enter the partition {slot0: | slot1:} [partition-number] [partition1-size] [partition2-size] command:
Router(config)# partition slot1: 1 2 4
The partition size is expressed in megabytes (MB).
- Status
