how can i nat one 2 one nat with symantec 200R 1

[smallProgrammer]

well i think the nat one 2 one is what i need.
i have 16 ip. adresses and want that 3 of those point on my webserver through the symantec 200R does someone know how to do it, or if it is in anyway possible.
thx for the help
charles =)

 

[SefLogic]

Hey smallProgrammer,

You are out of luck the SFVPN 200/R only supports one IP address per interface as per the link below, If you are sending three different IP address to one web server then by the sounds of it you are trying to have three different web sites on the one box. You can do this also by using Virtual Web Servers on Apache and ISS.

I hope this helps a little.

Symantec Firewall/VPN Appliance and Virtual IP addresses

http://service1.symantec.com/support/ent-gate.nsf/docid/2002062013012854?Open&src=w

Good Luck,


tips on fixing any problem in the world
1. Check google / google-groups
2. check the vendor support page
3. get a book on the topic